+- XenonZcar Z Car Forum (http://forum.xenonzcar.com)
+-- Forum: Z31 (http://forum.xenonzcar.com/forumdisplay.php?fid=7)
+--- Forum: General Z31 Discussion (http://forum.xenonzcar.com/forumdisplay.php?fid=8)
+--- Thread: What size bolt needed to put engine on Engine Stand? (/showthread.php?tid=8)
What size bolt needed to put engine on Engine Stand? - XenonZcar - 12-26-2024
10MM x 1.5 Thread bolts. I have the heavy duty HF stand, and the bolts needed to be ~100mm long.
You will need one Longer one with a Washer and Nut for the Starter Location bottom